| Customization: | Available |
|---|---|
| Warranty: | 12 Months |
| Accuracy: | >±1% |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.INTRODUCTION
|
Measurement Range
|
0.5-100Nm/s(20ºC, 101.33KPa)
|
|
Accuracy
|
±1% at not full scale ±0.5% at full scale
|
|
Range Ratio
|
Normally 100:1 (depending on the range of calibrated flow)
|
|
Pipe Diameter Range
|
15mm~6000mm
|
|
Application Range
|
Suitable for all kinds of single or mixed gases. Various corrosive gases containing dust, sand and moisture
|
|
Ambient Temperature Range
|
-40C-85C (no display); -30C-70C (with display) Humidity less than 90%RH
|
|
Medium Temperature Range
|
'-40ºC-100ºC;-40ºC-200ºC;-40ºC-450ºC;-40ºC-510ºC
|
|
Sensor Diameter
|
Φ3,Φ2.5
|
|
Probe Diameter
|
Φ19 (standard), Φ16, Φ12
|
|
Sensor Material
|
316 stainless steel, hastelloy, titanium
|
|
Probe Material
|
316 stainless steel (standard), Hastelloy
|
|
Analog Output
|
Flow rate: 4-20mADC
|
|
Temperature
|
4-20mA DC
|
|
Maximum Load
|
10002
|
|
Communication
|
Serial output RS232/RS485/24VDC/600mA;220V AC/2W;
|
|
Power Supply
|
24V DC/600mA,220V AC/2W,110V AC/3W
|
|
Alarm
|
1-2 way relay output, 5A/220V, 5A/30V DC, key in setting
|
|
Large LCD Display
|
Seven-digit instantaneous flow rate, eight-digit cumulative flow rate
|
|
Process Pressure
|
1.6MPa (max. 20MPa)
|
|
Explosion-proof Rating
|
Exd IICT6 Gb
|
|
Protection Level
|
IP65
|
|
Installation Process Form
|
Plug-in type (ferrule, ferrule + valve, flange connection) for pipeline installation above DN80 Piping type (flange, threaded connection) for piping installation above DN15 |
){kind=link}