China Manufacturer Pressure Transmitter Oil Sensor

• Measuring Medium: Gas
• Measuring Temperature: -20~50ºC
• Measurement Form: Gauge Pressure, Absolute Pressur
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SAC-PCM-302
• Measurement Range: -0.1MPa ~ 0MPa ~ 6MPa
• Measurement Accuracy: 0.5%F.S
• Measurement Stability: ±0.2%Fs/Year
• Overload Pressure: 150%Fs
• Operating Temperature: -20~50ºC
• Compensation Temperature: -20~50ºC
• Working Humidity: 95%Rh
• Storage Temperature: -40~85ºC
• Trademark: Aice Tech
• Origin: China
• HS Code: 9026202000

Product Description

Welcome to Jiangsu Aice Instrument Technology Co., Ltd., where precision meets innovation. As industry leaders, we are dedicated to providing state-of-the-art instrumentation solutions that redefine excellence.

Product Description

1. INTRODUCTION

Our state-of-the-art Pressure Transmitter Oil Sensor is engineered to comply flawlessly with the MODBUS communication protocol. It utilizes the sub-centralized RTU mode and operates in the robust RS485 half-duplex mode, ensuring seamless and reliable communication.

Serial Port Configuration: No parity, 8 data bits, 1 stop bit, meticulously set for optimal performance.
Example Configuration: 9600,N,8,1. This signifies: 9600bps baud rate, no parity, 8 data bits, and 1 stop bit, providing clarity and precision in data communication.
Our transmitter supports an extensive range of serial baud rates for versatile applications: 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200.
CRC Checksum Polynomial: 0xA001, ensuring data integrity and reliability through rigorous error checking.
The data communication process is meticulously managed using double-byte shaped data. For floating-point numbers, our system accurately reads and writes the decimal point, enabling precise data size determination.

Product Parameters

(1) Read command format (03 function code) example
A. Send read command format.

Address	Function Code	Data start(H)	Data start(L)	Data number(H)	Data number(L)	CRC16 (L)	CRC16(H)
0X01	0X03	0X00	0X00	0X00	0X01	0X84	0X0A

B. Return to read data format: Example

Address	Function Code	Data length	Data(H)	Data(L)	CRC16 (L)	CRC16(H)
0X01	0X03	0X02	0X00	0X01	0X79	0X84

(2) Example of writing command format (06 function code)
A. Send read command format.

Address	Function Code	Data start(H)	Data start(L)	Data number(H)	Data number(L)	CRC16 (L)	CRC16(H)
0X01	0X06	0X00	0X00	0X00	0X02	0X08	0X0B

1. Return to read data format: Example

Address	Function Code	Data start(H)	Data start(L)	Data(H)	Data(L)	CRC16 (L)	CRC16(H)
0X01	0X06	0X00	0X00	0X00	0X02	0X08	0X0B

1. Exception response returns

Address	Function Code	Exception code	CRC16(L)	CRC16(H)
0X01	0X80+Function Code	0X01(Illegal functions)
		0X02(Illegal data address)
		0X03(Illegal data)

4. Supported commands and the meaning of commands and data

Function Code	Data start address	Data number	Data bytes	Data range	Command Meaning
0x03 Function code to read data
0x03	0x0000	1	2	1-255	Read slave address
0x03	0x0001	1	2	1200	Baud rate reading

0x03	0x0003	1	2	#### ###.# ##.## #.###	The decimal points represent respectively 0-3 decimal places
0x03	0x0002	1	2	0- Mpa 1- Kpa 2- Pa 3- Bar 4- Mbar 5- kg/cm2 6- psi 7- mh2o 8- mmh2o	Pressure units
0x03	0x0004	1	2	-32768~32767	Measured output Value
0x03	0x0005	1	2	-32768~32767	Transmitter range zero point
0x03	0x0006	1	2	-32768~32767	Transmitter range full point
0x03	0x000C	1	2	-32768~32767	Zero offset value, factory default is 0
0x06 Function code reading data
0x06	0x0000		2	1-255
0x06	0x0001		2	1200 2400 4800 9600 19200 38400 57600 115200	Modify baud rate
0x06	0x000C		2	-32768~32767	Zero offset value Pressure output value = calibration measurement value + zero offset value
0x06	0x000F		2	0-Save to user area 1-Save to factory area
0x06	0x0010		2	1-Return factory parameters

Installation Instructions

When adjusting the baud rate of the China Manufacturer Pressure Transmitter Oil Sensor, the transmitter will confirm the new baud rate received from the host. Following this confirmation, the transmitter will update its baud rate to the specified target value.
Upon modifying the transmitter's address, the device will initially confirm its pre-modification address. Post-confirmation, the transmitter will automatically update to the new address.
When you issue the save and reply factory command, the transmitter will revert to its original value, indicating that it has successfully accepted the command from the host.
Be cautious when restoring factory settings. The factory parameters may differ from those set by the user. This means that the address, baud rate, and calibration data may change. Post-restoration, it is essential to search and reconfigure the transmitter to ensure correct settings.
Users can modify only three key parameters: address, baud rate, and zero offset.
For calibration or alteration of calibration data, please contact Jiangsu Aice Instrument Technology Co., Ltd. for the appropriate calibration software. Unauthorized attempts to modify calibration data will trigger an exception code from the transmitter. Utilize our provided calibration software for any calibration needs.
If the data being read is identified as a floating-point number, like 6.000, but the protocol indicates it as shaped data, it will be read as 6000. The decimal point is then used for conversion. For instance, if the decimal point is 3, the calculation would be 6000/10^3, resulting in 6.000.

Product Showing

Certifications

FAQ

1. Q: Can I purchase any of your product accessories?

A: Absolutely! Most of our accessories are available for purchase. However, in certain cases where designs are patented or protected by intellectual property rights, they may not be available.
For more detailed information, please contact our dedicated sales team.

2. Q: Can I become your exclusive distributor?

A: Indeed, we welcome such partnerships. This, however, depends on your annual purchase volume and the strength of our long-term relationship. We are seeking business partners who can establish a lasting trust with us.
Creating a long-term, trustworthy relationship is paramount to our collaboration.