a) Ensure the equipment is installed without pressurization and power supply for optimal safety and functionality.
b) A professional technician must install the transmitter after thoroughly understanding the operation manual.
manual.
c) The transmitter features a diffused silicon oil-filled core, which poses an explosion risk if mishandled. For safety, never use it to measure oxygen.
ensure safety, measuring oxygen is strictly prohibited.
d) This product is not explosion-proof. Using it in such areas can result in serious personal injury and considerable material damage.
and significant material damage.
e) Do not measure media incompatible with the transmitter's contact material to prevent malfunction or damage.
f) Upon receiving the product, check the packaging for integrity and verify that the transmitter model and specifications correspond with your order.
specifications match the product you have purchased.
g) Refrain from making any modifications or changes to the device to ensure its longevity and proper functioning.
Jiangsu Aice Instrument Technology Co., Ltd.h) Handle the transmitter carefully during installation, avoiding discarding or using brute force.
i) For safe and reliable operation, we recommend installing a three-valve set between the measured point and the transmitter for gradual and even media application to the pressure cavities.
between the measured point and the transmitter to ensure that the measured medium is slowly and evenly added to
the positive and negative pressure cavity of the differential pressure transmitter.
j) Install the pressure interface ends horizontally to minimize installation impact on the transmitter. If sizes mismatch, use custom adapters.
installation position has minimal impact on the transmitter. If the interface size and the field interface size does not
match, you can make your own adapters to connect.
k) Aim to install the device in areas with minimal temperature gradient changes for optimal performance.
l) For harsh sites prone to lightning or overvoltage, we recommend implementing protective measures between the distribution box or power supply and the transmitter.
dangerous damage, we recommend that users in the distribution box or between the power supply and the
transmitter to protect against lightning strikes and overvoltage.
m) When measuring steam or high-temperature media, ensure the medium temperature stays within the transmitter's working limit. Use a cooling device if necessary.
exceed the working temperature limit of the transmitter. If necessary, a cooling device needs to be installed.
n) Install a pressure shut-off valve between the transmitter and the medium to facilitate maintenance and prevent blockage, ensuring measurement accuracy.
facilitate maintenance and prevent the pressure port from blocking and affecting the measurement accuracy.
o) As a low-power device, wiring the transmitter must follow national standards (GB/T50312-2016) and be separate from high-power cables.
the relevant national wiring standards (GB/T50312-2016) should be observed for wiring.
p) Ensure the power supply voltage meets the transmitter's requirements and that the maximum static pressure remains within its tolerance.
maximum static pressure is within the tolerable range of this transmitter.
q) During pressure measurement, gradually pressurize and depressurize the transmitter to prevent sudden high or low pressure surges.
pressurization to high pressure or decreasing to low pressure.
r) Disconnect the transmitter from the pressure source and power supply before disassembling to avoid accidents from media ejection.
the transmitter to avoid accidents caused by media ejection.
s) The sensor is a precision device; do not disassemble it or touch the diaphragm on your own to avoid damage.
the diaphragm to avoid damage to the product.
Jiangsu Aice Instrument Technology Co., Ltd
Audited Supplier 
){kind=link}