High Accuracy Ultrasonic Flow Meter with RS485 Connectivity

• Customization: Available
• Warranty: 12 Months
• Accuracy: >±1%
• Model NO.: RC-MQ201-C4
• Main Application: Wastewater
• Sensor: Clamp-on/External
• Application: Flow Meter
• Type: Ultrasonic Flow Meter
• Measuring Media: Liquid
• Certification: CE
• Measuring Medium: Liquid Level
• Measurement Method: Ultrasonic
• Measurement Blind Area: 0.3m
• Measurement Accuracy: 0.3%Fs
• Power Supply: 220VAC/ 24VDC
• Discrimination Rate: 1mm
• Protection Level: Probe IP65
• Instrument Power Consumption: 5W
• Trademark: Aice Tech
• Origin: China
• HS Code: 9026202000

Product Description

Welcome to Jiangsu Aice Instrument Technology Co., Ltd., a leader in precise and innovative instrumentation solutions.

Product Description

1. INTRODUCTION

The Ultrasonic Open Channel Flowmeter by Jiangsu Aice Instrument Technology Co., Ltd. is an advanced, non-contact instrument that leverages the principle of acoustic reflection to measure water levels in weirs, ultimately calculating the flow rate. This sophisticated device consists of an ultrasonic probe and a mainframe, both encased in a fully sealed plastic structure. Widely applicable in industrial and environmental protection domains, it provides accurate flow measurements for open channels. The probe is mounted above the weir, intermittently emitting ultrasonic waves towards the water surface. Upon reflecting back, these waves are captured by the probe, and the main unit measures the time of propagation, t. Utilizing the pre-determined weir type, the main unit then calculates the precise flow rate based on the detected liquid level.

Product Parameters

Cumulative flow range	0~9999999 (full 8 bits are cleared, the accumulated times are incremented by 1, and the flow unit is set according to the setting)
Instantaneous flow range	10L/s~100m3/s (determined by the type and specification of the weir tank)
Flow accuracy	5%
Blind distance	0.06-2m (depending on different sensors)
Range	Default 3m (customizable)
Probe material	ABS material
Protection class	IP65
Cable length	10m shielded cable (customizable)
Host performance	Chinese 3 o'clock LCD, 18-bit keyboard operation, M16*1.5 electrical interface
Power supply	AC85~380V, DC11~24V
Power consumption	5W
Input signal	Ultrasonic probe, RS485 serial port
Output signal	1 (standard) or 2 4-20mA, 4 relays, RS485
Sensor Mounting Interface	Standard 485 interface (24V power supply)*2
Data browsing	Quickly view hour, day, month, and year traffic records
Option function	Support U disk data export

Detailed Photos

Installation Instructions

I. Basic Setting Once the instrument is installed, simply configure the installation height and select the appropriate standard weir/flume type along with its respective instrument settings. II. Installation Height Setting The installation height varies with different types of water measuring weirs/flumes. Below are guidelines for setting the installation height for several standard types: Parshall Flume: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the bottom inside the water measuring flume, in meters. Rectangular Weir: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the lowest point of the water outlet of the measuring weir, in meters. Triangular Weir: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the right-angle point of the water outlet of the measuring weir, in meters.
III. Flumes/Weirs Selection and Setting of Corresponding Geometric Parameters Choose the standard flume/weir type according to the actual type in use. Different types of flumes/weirs require setting specific geometric parameters. Below are the necessary geometric parameters for several common flumes/weirs: Parshall Flume: Select 'Parshall Flume' as the flume type and set the standard flume number. The width of the throat section of a Parshall flume determines the flume number, as detailed in Table 1. Rectangular Weir: Select 'Rectangular Weir' as the flume type and configure the channel width, weir width, bottom height, and the geometric parameters of the rectangular weir.

Certifications