Welcome to Jiangsu Aice Instrument Technology Co., Ltd., where innovation meets precision! We are your trusted partner in advanced instrumentation solutions.
![Inline Wall Mounted Ultrasonic Flowmeter](//www.micstatic.com/athena/img/transparent.png)
![Inline Wall Mounted Ultrasonic Flowmeter](//www.micstatic.com/athena/img/transparent.png)
I. Basic Setting Once the installation is complete, simply set the installation height and select the corresponding standard weir/flume type for operation. II. Installation Height Setting Installation height varies with different types of water measuring weirs/flumes. Below are the methods for confirming installation height for standard types: Parshall Flume: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the bottom inside the flume, in meters. Rectangular Weir: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the lowest point of the water outlet, in meters. Triangular Weir: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the right-angle point of the water outlet, in meters.
III. Flumes/Weirs Selection and Setting of Corresponding Geometric Parameters Select the standard flume/weir type based on the actual type in use. Then, set the corresponding geometric parameters: Parshall Flume: Choose the parshall flume type and set the standard flume number based on the throat section width, as detailed in Table 1. Rectangular Weir: Select the rectangular weir type and set parameters such as channel width, weir width, and bottom height, along with a description of rectangular weir geometric parameters.
![Inline Wall Mounted Ultrasonic Flowmeter](//www.micstatic.com/athena/img/transparent.png)