Marine Pressure Sensor Oil Pressure Transducer

• Measuring Medium: Gas
• Measuring Temperature: -20~50ºC
• Measurement Form: Gauge Pressure, Absolute Pressur
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SAC-PCM-302
• Measurement Range: -0.1MPa ~ 0MPa ~ 6MPa
• Measurement Accuracy: 0.5%F.S
• Measurement Stability: ±0.2%Fs/Year
• Overload Pressure: 150%Fs
• Operating Temperature: -20~50ºC
• Compensation Temperature: -20~50ºC
• Working Humidity: 95%Rh
• Storage Temperature: -40~85ºC
• Trademark: Aice Tech
• Origin: China
• HS Code: 9026202000

Product Description

Welcome to Jiangsu Aice Instrument Technology Co., Ltd., where precision meets innovation in every product.

Product Description

1. INTRODUCTION

Our advanced protocol integrates seamlessly with the MODBUS communication standard, utilizing the sub-centralized RTU mode and employing the RS485 half-duplex working mode. Experience unparalleled efficiency and reliability in your data transmission processes.

Serial Port Settings: Enjoy straightforward configuration with settings of no parity, 8 data bits, and 1 stop bit.
Example Configuration: 9600,N,8,1. This translates to a baud rate of 9600bps, no parity check, 8 data bits, and 1 stop bit for optimized performance.
Versatile Baud Rate Support: Our transmitter is compatible with a wide range of baud rates including 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200. Choose the one that best suits your operational needs.
CRC Checksum Polynomial: The system utilizes a CRC checksum polynomial of 0xA001, ensuring data integrity and reliability.
Data Communication Precision: Every aspect of the data communication process adheres to double-byte data handling. For floating-point numbers, the system meticulously processes the decimal point to accurately determine data size.

Product Parameters

(1) Exemplary Read Command Format (Function Code 03)
A. Transmission of the Read Command Format.

Address	Function Code	Data start(H)	Data start(L)	Data number(H)	Data number(L)	CRC16 (L)	CRC16(H)
0X01	0X03	0X00	0X00	0X00	0X01	0X84	0X0A

B. Response Showing Read Data Format: Illustration

Address	Function Code	Data length	Data(H)	Data(L)	CRC16 (L)	CRC16(H)
0X01	0X03	0X02	0X00	0X01	0X79	0X84

(2) Exemplary Write Command Format (Function Code 06)
A. Transmission of the Write Command Format.

Address	Function Code	Data start(H)	Data start(L)	Data number(H)	Data number(L)	CRC16 (L)	CRC16(H)
0X01	0X06	0X00	0X00	0X00	0X02	0X08	0X0B

1. Response Showing Write Data Format: Illustration

Address	Function Code	Data start(H)	Data start(L)	Data(H)	Data(L)	CRC16 (L)	CRC16(H)
0X01	0X06	0X00	0X00	0X00	0X02	0X08	0X0B

1. Handling of Exception Response Returns

Address	Function Code	Exception code	CRC16(L)	CRC16(H)
0X01	0X80+Function Code	0X01(Illegal functions)
		0X02(Illegal data address)
		0X03(Illegal data)

4. Detailed Overview: Supported Commands, Their Significance, and Data Interpretation

Function Code	Data start address	Data number	Data bytes	Data range	Command Meaning
0x03 Function code to read data
0x03	0x0000	1	2	1-255	Read slave address
0x03	0x0001	1	2	1200	Baud rate reading

0x03	0x0003	1	2	#### ###.# ##.## #.###	The decimal points represent respectively 0-3 decimal places
0x03	0x0002	1	2	0- Mpa 1- Kpa 2- Pa 3- Bar 4- Mbar 5- kg/cm2 6- psi 7- mh2o 8- mmh2o	Pressure units
0x03	0x0004	1	2	-32768~32767	Measured output Value
0x03	0x0005	1	2	-32768~32767	Transmitter range zero point
0x03	0x0006	1	2	-32768~32767	Transmitter range full point
0x03	0x000C	1	2	-32768~32767	Zero offset value, factory default is 0
0x06 Function code reading data
0x06	0x0000		2	1-255
0x06	0x0001		2	1200 2400 4800 9600 19200 38400 57600 115200	Modify baud rate
0x06	0x000C		2	-32768~32767	Zero offset value Pressure output value = calibration measurement value + zero offset value
0x06	0x000F		2	0-Save to user area 1-Save to factory area
0x06	0x0010		2	1-Return factory parameters

Installation Instructions

When adjusting the baud rate, the transmitter will respond with the baud rate provided by the host. After this confirmation, the transmitter's baud rate will seamlessly switch to the newly set value, ensuring optimized performance.
Upon altering the address, the transmitter will acknowledge by sending back the current address. After this exchange, the transmitter will automatically update to the new address, ensuring continued precision and reliability.
Executing the save and reply factory command will revert to the original settings, signifying that the transmitter has successfully accepted and implemented the host's command.
When reloading factory data, please be aware that the factory-set parameters might differ from user-saved settings. This discrepancy may affect the address, baud rate, and calibration data, necessitating a re-scan of the transmitter post-restoration for optimal operation.
Users are permitted to modify only three specific data points: address, baud rate, and zero offset. Adhering to these parameters ensures stable and accurate device functionality.
For calibration or changes in calibration data, please contact our company to obtain the necessary calibration software. User attempts to alter calibration data directly may trigger a command exception code from the transmitter. Utilize our proprietary software for all calibration modifications to ensure accuracy and integrity.
When reading data identified as a floating point number, such as 6.000, but communicated as an integer by protocol, the data is represented as 6000. To convert, apply the predetermined decimal point value. For instance, if the decimal is 3, dividing 6000 by 10^3 yields 6.000, maintaining data precision and consistency.

Product Showing

Certifications

FAQ

1. Q: Can I buy any of your product accessories?

A: Absolutely! Most of our accessories are available for purchase. However, please note that a few items with patented designs or intellectual property may not be available.
For more detailed information, feel free to get in touch with our dedicated sales team.

2. Q: Can I be your exclusive distributor?

A: Certainly! We value partnerships that can foster a long-term relationship based on trust and mutual benefit. Whether you can become an exclusive distributor will depend on your annual purchase volume and our ongoing relationship.
We are on the lookout for business partners who are committed to building a long-term, trustful collaboration.