Accurate Measurement Ultrasonic Liquid Level Flow Meter for RS485

• Customization: Available
• Warranty: 12 Months
• Accuracy: >±1%
• Model NO.: RC-MQ201-C4
• Main Application: Wastewater
• Sensor: Clamp-on/External
• Application: Flow Meter
• Type: Ultrasonic Flow Meter
• Measuring Media: Liquid
• Certification: CE
• Measuring Medium: Liquid Level
• Measurement Method: Ultrasonic
• Measurement Blind Area: 0.3m
• Measurement Accuracy: 0.3%Fs
• Power Supply: 220VAC/ 24VDC
• Discrimination Rate: 1mm
• Protection Level: Probe IP65
• Instrument Power Consumption: 5W
• Trademark: Aice Tech
• Origin: China
• HS Code: 9026202000

Product Description

Welcome to Jiangsu Aice Instrument Technology Co., Ltd., your trusted partner in precision instrumentation.

Product Description

1. INTRODUCTION

Our Ultrasonic Open Channel Flowmeter is a state-of-the-art, non-contact device that employs the acoustic reflection principle to precisely measure water levels in weirs. This advanced flowmeter, consisting of a fully plastic-sealed ultrasonic probe and mainframe, is designed to convert water level data into accurate flow measurements. Ideal for both industrial and environmental applications, it ensures high-precision open channel flow detection. The probe, positioned above the weir, intermittently sends ultrasonic waves to the liquid surface. These waves are reflected back to the probe, and the main unit calculates the propagation time (t) to determine the liquid level. Based on the pre-determined weir type, the device then computes the flow rate with unmatched accuracy.

Product Parameters

Cumulative flow range	0~9999999 (full 8 bits are cleared, the accumulated times are incremented by 1, and the flow unit is set according to the setting)
Instantaneous flow range	10L/s~100m3/s (determined by the type and specification of the weir tank)
Flow accuracy	5%
Blind distance	0.06-2m (depending on different sensors)
Range	Default 3m (customizable)
Probe material	ABS material
Protection class	IP65
Cable length	10m shielded cable (customizable)
Host performance	Chinese 3 o'clock LCD, 18-bit keyboard operation, M16*1.5 electrical interface
Power supply	AC85~380V, DC11~24V
Power consumption	5W
Input signal	Ultrasonic probe, RS485 serial port
Output signal	1 (standard) or 2 4-20mA, 4 relays, RS485
Sensor Mounting Interface	Standard 485 interface (24V power supply)*2
Data browsing	Quickly view hour, day, month, and year traffic records
Option function	Support U disk data export

Detailed Photos

Installation Instructions

I. Basic Setting: Once the instrument installation is complete, simply set the installation height and select the appropriate standard weir/flume type for operation. II. Installation Height Setting: The installation height varies based on the type of water measuring weir/flume as detailed below: Parshall Flume: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the bottom inside the flume, in meters. Rectangular Weir: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the lowest point of the water outlet, in meters. Triangular Weir: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the right-angle point of the water outlet, in meters.
III. Flumes/Weirs Selection and Setting: Select the appropriate flume/weir type based on actual conditions. Then, set the corresponding geometric parameters. For common flumes/weirs, the required parameters are as follows: Parshall Flume: Choose the parshall flume type and set the standard flume number, determined by the throat section width, as listed in Table 1. Rectangular Weir: Choose the rectangular weir type, and set the channel width, weir width, bottom height, and other geometric parameters as required.

Certifications