Economical Ultrasonic Water Flow Meter

• Warranty: 12 Months
• Accuracy: >±1%
• Main Application: Wastewater
• Sensor: Clamp-on/External
• Application: Flow Meter
• Type: Ultrasonic Flow Meter
• Model NO.: RC-MQ201-C4
• Measuring Media: Liquid
• Certification: CE
• Measuring Medium: Liquid Level
• Measurement Method: Ultrasonic
• Measurement Blind Area: 0.3m
• Measurement Accuracy: 0.3%Fs
• Power Supply: 220VAC/ 24VDC
• Discrimination Rate: 1mm
• Protection Level: Probe IP65
• Instrument Power Consumption: 5W
• Trademark: Aice Tech
• Origin: China
• HS Code: 9026202000

Product Description

Welcome to Jiangsu Aice Instrument Technology Co., Ltd., where innovation meets precision.

Product Description

1. INTRODUCTION

The Ultrasonic Open Channel Flowmeter from Jiangsu Aice Instrument Technology Co., Ltd. is a state-of-the-art, non-contact device that uses acoustic reflection principles to accurately measure water levels in weirs. This sophisticated meter, comprising an ultrasonic probe and a mainframe, is encased in a fully plastic-sealed structure, ensuring durability and reliability. Widely applicable in both industrial and environmental sectors, this flowmeter excels in detecting open channel flow with unparalleled accuracy. The ultrasonic probe, positioned above the weir, intermittently emits ultrasonic waves that reflect off the liquid surface. These reflections are captured by the probe, and the propagation time (t) is meticulously measured by the main unit. By identifying the type of weir, the host unit precisely calculates the flow rate based on the detected liquid level.

Product Parameters

Cumulative flow range	0~9999999 (full 8 bits are cleared, the accumulated times are incremented by 1, and the flow unit is set according to the setting)
Instantaneous flow range	10L/s~100m3/s (determined by the type and specification of the weir tank)
Flow accuracy	5%
Blind distance	0.06-2m (depending on different sensors)
Range	Default 3m (customizable)
Probe material	ABS material
Protection class	IP65
Cable length	10m shielded cable (customizable)
Host performance	Chinese 3 o'clock LCD, 18-bit keyboard operation, M16*1.5 electrical interface
Power supply	AC85~380V, DC11~24V
Power consumption	5W
Input signal	Ultrasonic probe, RS485 serial port
Output signal	1 (standard) or 2 4-20mA, 4 relays, RS485
Sensor Mounting Interface	Standard 485 interface (24V power supply)*2
Data browsing	Quickly view hour, day, month, and year traffic records
Option function	Support U disk data export

Detailed Photos

Installation Instructions

I. Basic Setting After installing the instrument, simply configure the installation height and select the appropriate standard weir/flume type along with its corresponding instrument for seamless operation. II. Installation Height Setting The installation height varies depending on the type of water measuring weir/flume. Here’s a guide for confirming the installation height for several standard weir/flume types: Parshall Flume: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the bottom inside the flume, in meters. Rectangular Weir: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the lowest point of the water outlet, in meters. Triangular Weir: Measure the vertical distance from the end of the ultrasonic transducer (probe) to the right-angle point of the water outlet, in meters.
III. Flumes/Weirs Selection and Setting of Corresponding Geometric Parameters Select the standard flume/weir type based on the actual configuration. Adjust the geometric parameters accordingly. Here are the parameters for some common flume/weir types: Parshall Flume: Choose the flume type as Parshall Flume and set the standard flume number based on the throat section width, as indicated in Table 1. Rectangular Weir: Select the flume type as Rectangular Weir and configure the channel width, weir width, bottom height, and other geometric parameters.

Certifications